- 15 000 beach balls
- 1 million silicon wrist bands
- 340 000 Kika-Sack™
- 9 000 cooler bags
- 15 000 lanyards
- 120 000 promotional bunting
- 22 000 branded socks
- 36 000 Kika-Sack™
- 11 000 soccer ball radios
- 6 000 rugby ball key chains
- 22 000 hacky sacks
Another supplier had seriously let us down - we had less than one week to make an urgent plan, Bespoke Sourcing saved the day to say the least THANK YOU THANK YOU!
- Derek Whitehead - The Artery
The turnaround time that unfolded was staggering, a branded import job landed in only 7 days – still amazed
- Geoff Louw - Savanah Hemp
Happy days, the Bespoke Sourcing team went the extra mile for us, end product and communication top notch from start to finish. Well done chaps.
- Rich Cheary - PTSportSuite
Gavin and team were on the ball throughout, very happy with our merchandise and we would certainly endorse the Bespoke Sourcing team.
- Andre Krige - Innovate Properties
Very quick responses to questions, turn around with artwork approval also quick. We did have one issue that was resolved quickly and generally was kept very well informed.
Delighted with the finished product.
- Sibongile Twele
Communication and branding advice was excellent from the get go. The finished product was actually above expectations; we had only seen 3D mock-ups. Thanks Bespoke Sourcing!
- Jen Marshall-Smith
Prompt responses to the bundles of questions that we initially raised. Concise information provided. Delivery of items were on time as promised.
- Sid Modise
Artwork
We strive to do anything under the sun but we can only do this with your input and co-operation. The following information will guide you in understanding our artwork procedures. Archie Promo has a full time art department to help ensure that you get what you want when you order.
 |
Download Pantone Colour Chart |
Before the order is accepted we produce a graphical sample which will then be signed off by you. Nothing will be produced until this happens.
One Time Artwork and Set-Up Fee
The Set-Up cost will vary per print format but we will always let you know in advance when we send you a quotation.
Acceptable file formats:
Please send the relevant artwork in the appropriate format.
(Vector artwork is preferred (.CDR / .EPS /.AI / .PDF / .FH)
Unacceptable artwork formats:
- Word files, .gif, .jpeg (under 600dpi), Power point
Artwork fees:
- Artwork received in the correct format will not be charged for.
- Artwork not received in the correct format will attract a design and redrawing fee of R300+ ex VAT
- Please note: As standard procedure we do charge for product samples.
Vectorised Artwork
These are ideal files for the correct printing and reproduction of your logo on promotional products.
JPEG(.jpg) Files
.jpg files are okay for embroidery or promotional products such as hats or promotional caps, but they have to be re-illustrated for printing and engraving of metallic promotional products. A high res .jpg file can also be used for printing digital or offset printing jobs, though it is not a preferred file type for most logo reproduction on promotional products.
PDF Files
.pdf files are becoming the industry standard for offset and digital printing of promotional merchandise and promotional products. They have only limited use for printing promotional products. A .pdf file is fine for embroidery but we have to re-illustrate a .pdf logo if printing or engraving is required. We thought it helpful to describe our various types of printing methods, by means of illustration:
Branding Methods:
- Embroidery
is where the logo or detail is sewn or woven into the material and is very effective in branding anything of a textile nature (eg. caps, T-shirts, apparel). It is generally considered the best branding method for smaller areas as the costs are determined by the number of stitches applied (not the number of colours) and there is no limit to the number of thread colours that can be used. Embroidery provides a professional finish and has a high perceived value.
- Screen Printing
involves pressing ink through a fine mesh
screen, leaving a clean and crisp imprint on the materials surface. It is most commonly used on T-shirts, jackets, bags etc but can also be used to brand larger images on metal, plastic, leather, PVC and wooden objects - basically anything with a flat surface. It is often the most economical form of branding, especially on large areas or where the logo and images have few colours and patterns. Limitations may exist in reproducing fine detail and colour registration due to the flexibility and weave of materials.
- Pad Printing
is an ideal means of branding logos and images to provide excellent colour and detail on small, hard or unusually shaped items. Pad printing involves a printing plate with an image etched into the surface which is covered in ink, applied and then cleaned leaving only the image. Branding to a maximum approximate size of 50mm and up to 4 colours is achievable. The application of a pad print is most common on small plastic or metal items like pens, golf balls, desk items etc.
- Plastisol Transfers
a plastisol print is a heat and pressure transfer applied to the materials surface (eg. apparel, bags, caps) and used when the required colours or detail are too intricate for screen printing or if the surface being used is not suitable ie too porous. Plastisol transfers have a higher profile and smoother finish than screen printing and are an excellent option for 4-colour process or photographic images.
- Foil Stamping
is achieved by applying foil in the required design, which is heated and pressed onto the surface of the product, leaving a bright metallic gold or silver effect. Foil stamping is ideal for items such as diaries and compendiums and is the highest quality of branding for leather, PVC or PU 'leather look' items. This method can also be used on paper, board and plastic surfaces.
- Embossing
is a process where a logo or design is pressed with heat and pressure to create a three-dimensional raised area and adds a simple elegance to products. It is ideal for leather products, but can also be performed on paper or thin metal items. The embossing can be left unfilled (known as 'blind emboss') or filled with a foil colour eg gold or silver.
- Laser Engraving
is commonly used on metal objects (eg. pens, key rings) to a maximum logo size of 30mm. It can also be used on some plastic, glass and wooden surfaces. Laser engraving is a computer generated, subtle and precise method of branding that leaves a professional and permanent form of branding that will never come off.
- Decal Printing/Kiln fired Decals
are generally used on glassware or mugs where the artwork is printed in the desired number of colours onto a transfer and then fired onto a coffee mugs or glassware. Decals can be made in 1 to 4 spot colours or even 4-colour-process. Logos are commonly applied as 'one position', half wrap decals or 'two position' (front and back) and full wrap decals. Special decals may be used on glassware to give either a 'frosted logo' look or a 'frosted glass' look.
- Rubber Badging
is where a logo or image is created using a rubber or PVC badge (it can also be done using metal) and is then attached to the product.
- Product Packaging
allows additional branding, identification and packaging options to enhance the presentation of products. There are various methods, such as custom made boxes to house product, backing cards for lapel pins, heat sealed or poly-bags with a retail style header card printed with product and/or company information. Product packaging is generally customised to suit the product.
3D turnable animation
It Began With A Sack
Bespoke Sourcing was founded by a group of young entrepreneurs. The legendary Kika-Sack™ stormed the South African corporate gift scene in 2008 and became a brand all of its own.
- 30 000 boxing glove key rings
- 30 000 supporter hands
- 20 000 money banks
- 17 000 cooler bags
- 10 000 bone shaped pens
- 11 500 shower timers
- 50 000 cheering Sticks
- 12 000 coffee Mugs
- 10 000 caps
- 12 000 T-shirts
- 1 million silicon wrist bands
